StorageTrak Installation Overview

Step 1

Measure the installation height with a tape measure. 78” high is recommended.

Step 2

Using a level, draw a line at the top of the upper J-Trak.

Fasten the upper J-Trak to studs in the wall using a screw gun and provided screws. The J-Trak has holes pre-drilled every 8”.

Step 3

Hang the wall panels on the upper J-Trak.

Make sure the ends of the wall panels are flush with the J-Traks.

Step 4

Refer to the assembly instructions and install the lower J-Trak.

To ensure that you screw into a stud, use the same mounting holes as the top J-Trak.

Step 5

Install the hooks and shelves to the wall panels.

All components can be re-positioned and can be installed where they will be most useful.

Step 6

Finished !!!